Qnap TS 453BT3 4 Bay Storage Chennai, Hyderabad
Qnap TS 453BT3 4 Bay Storage
- CPU: Intel Celeron J3455 quad core 1.5 GHz processor (burst up to 2.3 GHz)
- CPU Architecture: 64 bit x86
- Graphic Processors: Intel HD Graphics 500
- Floating Point Unit
- Encryption Engine: (AES-NI)
- Hardware accelerated Transcoding
- System Memory: 8 GB SO DIMM DDR3L (2 x 4 GB)
- Maximum Memory: 8 GB (2 x 4 GB)
- Memory Slot: 2 x SO DIMM DDR3L
- For dual DIMM configuration, you must use a pair of identical DDR3L modules
- Flash Memory: 4GB (Dual boot OS protection)
- Drive Bay: 4 x 3.5-inch SATA 6Gb/s, 3Gb/s
- The system is shipped without HDD
- For the HDD compatibility list
- Drive Compatibility: 3.5 inch SATA hard disk drives
- 2.5 inch SATA hard disk drives
- 2.5 inch SATA solid state drives
- Hot swappable
- The following are not hot swappable: M.2 SSDs, SSD cache drives, SSDs using PCIe expansion slots
- M.2 SSD Slot: 2 x M.2 2280 SATA 6Gb/s SSD slots (pre-installed QM2 PCIe card)
- The M.2 SSD is not included as standard.
- SSD Cache Acceleration Support
- Gigabit Ethernet Port (RJ45): 2
- 10 Gigabit Ethernet Port: 1 x 10GBASE-T (10G/5G/2.5G/1G/100M)
- Pre installed QM2 PCIe card
- Jumbo Frame
- Thunderbolt Port: 2 (Thunderbolt 3)
- PCIe Slot: 1 x PCIe Gen 2 (x2), pre installed with a QM2 expansion card (QM2 2S10G1TB) that includes a 10GbE 10GBASE T port and two M.2 SATA SSD slots
- The M.2 SATA SSD slots on this QM2 card only support M.2 2280 SATA 6Gb/s SSD, please check the compatibilities before purchase
- PCIe bandwidth limitations will restrict the NAS 10GbE performance
- USB 3.2 Gen 1 port: 5
- USB 3.2 Gen 2 (10Gbps) Port: Optional via a PCIe adapter (need to replace the pre-installed QM2 card)
- IR Sensor: (RM-IR004, RM-IR002, & MCE)
- HDMI Output: 2, HDMI 1.4b (up to 3840 x 2160 30Hz)
- Audio Input: 2 x 3.5mm dynamic microphone input jacks
- Audio Output: 1 x built in speaker, 1 x 3.5mm line out jack (for amplifier or headphone amplifier)
- You cannot use the speakers and the line out jack simultaneously
- Form Factor: Tower
- LED Indicators: Power/Status, LAN, USB, HDD1-4
- LCD Display/ Button Monochrome OLED display with capacitive sensing Enter and Select buttons
- Buttons Power, USB copy, Reset, Capacitive touch buttons (select, enter)
- Dimensions (HxWxD): 168 × 170 × 226 mm
- Weight (Net): 2.51 kg
- Weight (Gross): 4.05 kg
- Operating temperature: 0 ~ 40?C (32?F ~ 104?F)
- Relative Humidity: 5-95% RH non-condensing, wet bulb: 27?C (80.6?F)
- Power Supply Unit: 120W adapter, 100-240V
- Power Consumption: Operating Mode, Typical 38.101 W
- Fan System: 1 x 120mm
- Sound Level: 16.1 db(A)
- System Warning: Buzzer
- Kensington Security Slot
- Max Number of Concurrent Connections (CIFS): 800
Qnap TS 453BT3 4 Bay Storage Specification